Adhesives of following industries


Automatic Corrugated 3/5 Ply Plant

For automatic plants we supply single adhesive powder used for both corrugation and pasting operations, it is a cold water soluble powder, it has high initial tackiness, quicker gelling and rapid bond forming properties to enable machine to run at rated speed. Its has a high consistency and extremely stable viscosity so it increases the Dry strength as measured by the PAT (Pin adhesion test), ECT (Edge Crush Test) and BCT (box crush test). For this we recommend Water mix ratio upto 1:4 with solid upto 25% and also can be manufactured according to the customize needs.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Semi Automatic Corrugated Box plant

For semi corrugated plants, we have two different Adhesive powder one for Corrugation and other for Pasting based on modified Tapioca starch and modified Maize Starch. Corrugation Powder is cold water soluble with different water mix ratio (1:4 to 1:7). And in Pasting Powder , one can choose for hot water soluble or cold water soluble powder with high pH and Neutral pH, depending upon the application ( GSM , BF & type of flute), in pasting gum there are various water mix ratios ( 1:2 to 1:10 ) and resulting solids between 8% to 33%. and also the Viscosity of the glue can be maintained at a constant level according to the required demand irrespective of the water mix ratio.
Our adhesives help corrugators achieve dry board ( moisture of 10%) in 5 ply board in less than 1 hour. Different grades of adhesives are available for Heavy GSM coated kraft ,Duplex Board ,E Flute and Micro flutes.


Paper Tube / Core / Edge Protector / Angle Board / DTY, POY Manufactures

For manufacturing these items we have “Dex Gum Powder” it has high tackiness and very quick setting properties. Dextrin based adhesive formulations are generally used for this application. Complete lamination of Paper to paper is critical in achieving potential compression strength. We offers Tapioca Dextrin based adhesive for formulations for these products. Depending upon the application, one can choose the water mixing ratio (1:1 to 1:3) resulting solids between 25 % to 50%. The viscosity of the product is machine speed dependent and can be maintained at a constant level.

Flute laminator machine

Our Starch based adhesive powder for flute laminator is much more rigid and strong and even econmical in comparison to PVA and PVAC glue. It endures humidity well and fully meets the needs of all kinds, its water soluble ratio is 1: 2 with solid contents of 33%. It can paste within 10-15 secs, and gets dry within 10-15 mins.


Sodium Silicate

Sodium silicate is a liquid adhesive with the formula Na2(SiO2)nO. Its in a liquid form Also known as water glass or liquid glass, sodium silicate is used as a adhesive in semi automatic corrugated plants instead of pasting gum. Dryness time of sodium silicate is much faster as compared to starch based pasting gum and also after drying it form like a dry glass layer between the sheets which gives the sheet excellent adhesion and stiffness.

Sodium silicate is also used in casting industry, soap industry and construction cement as a binder with different specifications and formulation

Foundry, Textile, Paper Industry

We also manufacture Yellow dextrin. Which is also a water-soluble glue powder used as in :-
1. The foundry industry as strength additives in sand casting,
2. Remoistable envelope adhesives
3. Mining industry as additives in froth flotation
4. Binders in gouache paint and also in the leather industry.

And also we have White dextrins used as in :-
1. Thickening and binding agent in pharmaceuticals and paper coatings.
2. Textile finishing and coating agent to increase weight and stiffness of textile fabrics
3. Pyrotechnic binder and fuel, they are added to fireworks and sparklers, allowing them to solidify as pellets or “stars.”

Gum Powder Mixing Machines